Re: [Amc-list] Early 80's 4-cyl bellhousing

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: "oldcars@xxxxxxxxx" <oldcars@xxxxxxxxx>
" 
" One more question...
" 
" I have an 81 Concord 4 cyl 4 speed, which has been laid up for a long
" while. 
" I have to fix the clutch master cylinder and slave cylinder, and replace
" the windshield.
" 
" However, I came across a T-86 with overdrive
" 
" I would love to team up the overdrive with the 4 cylinder, so it would have
" good
" crusing mileage. 
" 
" Are there any other patterns likely to be drilled into the bell, or only
" the SR4/T4/T5?

that may be the only one drilled, but if it's a multipattern it'll
have places for the t150/t176/7/8 and t14/t96, and t18 too i'll bet.
but none of those match the t86, and afaik the bell is too shallow
also - the t86 needs deep bells like the t10, t89, and t15.

but why the t86 in the first place?  t5s have o/d [5th] and there are
toploader overdrives [from '70s granadas] that'll bolt up too.

in addition, that 4-cyl is a poncho with a chevy sbc bolt pattern, so
there are many trannies with o/d top gears you could opt for if you
used a gm bell.

trans-dapt - if they're still around - may have a gm bell to t86
adapter originally intended for engine swaps.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list