Chris, thanks I gave it the old college try last night and followed what I thought you were saying and got it in. Thanks for the help. Keith Evenson On Jul 23, 2008, at 4:31 PM, Chris Peters wrote: > I told ya it would be hard to describe. I just did it the other > day, and we > have he same setup, so > > It is easier to see if you took the belts out yourself. See if you > can it > all in place before you install it. Then, clamp the bolt in a vise > with the > rubber cover facing up and the belt coming towards you. Then, fold > the belt > back away from you, so it folds over the cover, and over the bolt > head. > Now, you should see a loop of belt material, grab the belt and pull > out a > loop 3-4 inches. Pull the cover some, and now you should be able > to get to > the bolt head with a dogbone wrench. Bolt in place, pull the loop > back out, > and fold it back into place. The folding the key here. > > If that still does not work, I'll take some pics for you. Email me > direct > if you like. cpeters1@xxxxxxxxxx > > -----Original Message----- > > Date: Tue, 22 Jul 2008 16:47:58 -0500 > From: Keith Evenson <epd@xxxxxxxxxxxx> > Subject: Re: [Amc-list] seat belt install > To: "AMC/Rambler owners, drivers and fans." <amc-list@xxxxxxxxxxxx> > Message-ID: <FB242AFD-CBB3-49F4-B98A-08339DAA9C36@xxxxxxxxxxxx> > Content-Type: text/plain; charset="us-ascii" > > That is what I thought but the bolt on mine goes thru a loop on the > back side of the seatbelt loop. So the cover loop has to be in place > when you put the bolt in the hole. > > Keith > > > _______________________________________________ > Amc-list mailing list > Amc-list@xxxxxxxxxxxx > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://splatter.wps.com/pipermail/amc-list/attachments/20080723/aee4d16c/attachment.htm _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list