Re: [Amc-list] Looking for a torque tube T-96 trans w/OD
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Amc-list] Looking for a torque tube T-96 trans w/OD
- From: mastrmike@xxxxxxxxxxx
- Date: Sun, 06 Jul 2008 17:22:01 +0000
Anyone dig up an adaptor for me yet? I am going crazy here.
Thanks
--
Mike Mastrangelo
Bugsys Motor Services
847-809-0008
-------------- Original message --------------
From: Frank Swygert <farna@xxxxxxx>
> Don't forget to unfasten the park brake cable (near the front, leave in the
> wheels!) and the rubber brake line! If that rubber line looks a bit old now
> would be the perfect opportunity to replace it. The axle won't go back far
> enough without stretching that line, which shouldn't be done.
>
> Does your car have the four bolt torque tube -- four bolts holding the tube to
> the flange -- or the older two bolt type? The OD trans is identical for TT and
> open drive cars, just the adapter is different.
>
> ---------------
> Date: Sat, 5 Jul 2008 12:58:27 -0400
> From: "oldcars@xxxxxxxxx"
>
> I am still working in the odd moments which I can find on the 62
> Classic, and I have the bolts holding the Torque Tube to the tailshaft
> housing removed (actually last bolt is still in place since there is
> pressure on it but I did not want it out yet) and have already unbolted the
> shock lower mounts and the Panhard rod bolt (also left in place for now),
> so after I unhook the speedo, the linkage, and the trans-to-bellhousing
> bolts, I will be ready to try pulling the axle rearward and see whether I
> can get out the trans.
>
> Since the Overdrive T96 should be a bolt in, I am interested in seeing
> whether anyone has a torque tube T96 which they would sell. I guess that I
> will see whether Mike can get his part, since mine is (apparently) complete
> and the '67 T96 gearbox should hopefully bolt up to the '62 tailshaft &
> housing and put mine back on the road. Just thought I would see whether I
> could upgrade to OD while I was at it.
>
> If only this were a non-torque tube car, I know where I could get a new
> one, although it is something like $400....
>
> --
> Frank Swygert
> Publisher, "American Motors Cars"
> Magazine (AMC)
> For all AMC enthusiasts
> http://farna.home.att.net/AMC.html
> (free download available!)
>
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://splatter.wps.com/pipermail/amc-list/attachments/20080706/4d11bb7d/attachment.htm
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
Back to the Home of the AMC Gremlin