oldcars@xxxxxxxxx wrote: > Since the Overdrive T96 should be a bolt in, I am interested in seeing > whether anyone has a torque tube T96 which they would sell. I guess that I > will see whether Mike can get his part, since mine is (apparently) complete > and the '67 T96 gearbox should hopefully bolt up to the '62 tailshaft & > housing and put mine back on the road. Just thought I would see whether I > could upgrade to OD while I was at it. Others here may know details, but you might need to double-check the rear motor mount business, and speedo location. 62 is different than 63-up, which is two mounts under the motor left right, an only one unter the trans tail. 62 has two mounts in rear, right? I forget what the 62 "big car" uses, but the American the rear mounts are on the bellhousing, so for that car either would work. This business is easily checked before you buy. Frank points out that the speedo gear and cable comes out of the TOP of the trans on one set of years/models, and out the BOTTOM on the other. Bottom might work in a "top" car, but not vice-versa. Sorry to be a bummer! Yeah, the OD would be a drop-in, and the under dash cable for it easy. But you really need to change the axle ratio at the same time, six or eight. _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list