Re: [Amc-list] T-14 on a torque tube...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Amc-list] T-14 on a torque tube...
- From: Wrambler242@xxxxxxxxxxx
- Date: Tue, 24 Jun 2008 18:09:00 +0000
ooh, search evilbay.
Was a brand spanking N.O.S. zbar for a 65-66, six cylinder ambo/classic last week!
Should be close enough to get it to work!
An inch back on the rear end probably won't even stress the panhard bar either!
When I put my quarter section in on the Ambassador I plan on moving the wheelwell forward to alieve some of the clearance issues with bigger rubber, may even mini tub it.
That'll depend on what I feel like when/ if I get that far!
Right now my workshop smells like dead mouse/ bees.
I found a dead mouse on the floor.
The little buggers must have moved in while it was outside!
The bees nest I knew about.
Not a real pleasant smell.
I got the dehumidifier on high, hoping to pertrify any carcasses while I'm in San Fransisco next week!
--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
2004 Grand Cherokee Laredo, 4.7L, Quadratrc II
" Chronic Pain Hurts"
-------------- Original message ----------------------
From: Tom Jennings <tomj@xxxxxxx>
> Wrambler242@xxxxxxxxxxx wrote:
> > Thinking dissturbing thoughts.
> > Can you sneak the engine forward an inch or so and the rear back?
>
>
> HOLY CRAPTACTICAL, BATMAN!!
>
> Wee! I totally forgot that I had to slide the engine BACKWARDS two
> inches to make it fit -- I drilled new holes in the front crossmember to
> accomodate the new motor mount position! See photos. Some combination
> of 1965, T-96 to M35, 195.6 aluminum to 232, ... the motor had to go
> backwards. Keep in mind I did this swap, cold, in 1989. No internet,
> just a TSM and one AMC junkyard. I just juggled parts 'til it worked.
>
> There's my room. OK that solves the major geometry problem.
>
> http://wps.com/temp/driver-mount-offset.jpg
> http://wps.com/temp/pass-mount-offset.jpg
>
>
> I even have an empty clutch pedal swinging on the floor of this car...
> I'm missing the Z-bracket and other parts but I can find or make those.
>
> OK, this sounds like a doable project now. I even have enough spares to
> mock most things up without disassembling the car. Wish I had a spare rear.
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
Back to the Home of the AMC Gremlin