Re: [Amc-list] New 2" header interest

[Davis Martin <martin-davis@xxxxxxxxxxxxx>]

Nick,
   I would buy a set in a heartbeat if you can get them made to fit small bodies from 70 up. I looked into a custom set but 1800 was too much for me. 
   Davis 

Nick ALFANO <71amx@xxxxxxxxxxxxx> wrote:
  Hi all,
 
I am putting a couple feelers out there on interest in a performance style header for our cars.  I am working with a major header manufacturer to re-create the 2" Hustler header.  This header has 2" primaries, fits our cars much better than the Hooker 1&7/8" headers and doesn't hang as low to the ground.  Header flanges are real nice and will be welded than machined flat for a good seal. This is as close to a custom header as you will get in a premade style without the $2000 cost for a custom set.  
 
We will be starting on the project in about 1-2 weeks and will take approximately 2 months to complete.  I will be looking for some pre-sale orders to help cover the initial run.  I don't have the cost yet but as always, I will keep the cost down as much as possible.
 
If you respond to the list directly, please also copy my e-mail address directly so that I can keep a file.
 
Thanks,
 
Nick,
 Alfano Performance
4849-76 st.
Kenosha, WI. 53142
262-308-1302
262-942-8271 after 6pm central and weekends 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://splatter.wps.com/pipermail/amc-list/attachments/20080623/c3c1e307/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list