Throttle linkage is cake. Get a cable and throttle pedal from any 69 AMC six and bolt it in. May have to drill a few holes, but no big deal. I alsways swap out the linkage drive when I get to fiddlign around with the older ones. One broken motor mount and a stuck throttle from engine lift will make you pucker... -- Mark Price Morgantown, WV 1969 AMC Rambler, 4.0L, EFI, T-5 2004 Grand Cherokee Laredo, 4.7L, Quadratrc II " Chronic Pain Hurts" -------------- Original message ---------------------- From: Jim Blair <carnuck@xxxxxxxxxxx> > You need the '81 to '90 intake for a 4.2L (you'll also get to use the bigger > power 2 bbl carb setup) Throttle linkage will be the thing to work on. > > > From: "chad chadwick" <chadchadwick@xxxxxxxx> > Subject: [Amc-list] headers > To: amc-list@xxxxxxxxxxxx > Message-ID: <20080620175805.77F3EBE4078@xxxxxxxxxxxxxxxxxxxxxx> > Content-Type: text/plain; charset="iso-8859-1" > > Hello, I would like to find out how I put headers on my 322 6 cylinder.The > original 6 cylinder engine has the intake and exhaust bolted together. > If you take the exhaust manifold off there would be an air gap, do you > have to get a special intake manifold or is there a way to block the air > gap? This is totally new to me. Sincerely, Chad Chadwick > > 68 AMC Javelin > _________________________________________________________________ > The i?m Talkathon starts 6/24/08. For now, give amongst yourselves. > http://www.imtalkathon.com?source=TXT_EML_WLH_LearnMore_GiveAmongst > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://splatter.wps.com/pipermail/amc-list/attachments/20080620/0ea85e16/attachm > ent.htm > _______________________________________________ > Amc-list mailing list > Amc-list@xxxxxxxxxxxx > http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list
_______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list