On Tue, 6 May 2008, d stohler wrote: > tag # 1352-194 according to the person selling the > trans is from a '90 4cyl mustang. > Total input shaft length from case to end of input > shaft, 7" > > Length from end of bearing retainer to end of input > shaft, 6" > > OD of input shaft at pilot, .590" Sounds like the T-96 alright. I forget the pilot size but the shaft from trans case to tip is 7". The problem here is that the adapter is 5/8" thick, so you'd need a 7-5/8" input shaft. THere's a "long" input shaft version of the T-5. The Volvo page I posted earlier had the same problem; he clipped the top off the long shaft with a cutoff wheel (sounds gross, it's not, go look). _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list