" To: "AMC/Rambler owners, drivers and fans." <amc-list@xxxxxxxxxxxx> " " The steering stop mounts to the back side of the steering " knuckle. Everything outboard of the knuckle is the same between " Pacers and everything else, and will interchange. Note that 1975/76 " got the "big Bendix" brakes while later years got other types. For " Pacer owners, it appears that the late rotors will fit the big Bendix " setup, and are much less expensive. I haven't tried it yet, but have " a set that I plan to try. my '65 american project car had '76 pacer disks on it. i never got it finished enough to drive it, but they bolted up fine. afaik the spindles, caliper brackets, etc were the same as other amcs. -some- late rotors fit the big bendix spindles -- the '77-8 small bendix setup used the same calipers as '79-'81 but the big bearing spindles. afaik the rotors are not as thick as the big bendix ones. btw the late small bearing rotor fits '79-'83, with both the bendix and delco calipers. i think if you swapped spindles it'd fit '77-8 too. ________________________________________________________________________ Andrew Hay the genius nature internet rambler is to see what all have seen adh@xxxxxxxxxxxxxxxxx and think what none thought _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list