Re: [Amc-list] Hot Rod Magazine and Some Thoughts

[Jim Blair <carnuck@xxxxxxxxxxx>]

Ah! Good point. I'll have to keep my 9" drums for now then. Too bad the XJ axles are wider or I'd just swap the whole thing in! (I probably could if I found the right offset rims but then they would be different from the front unless I made spacers to equal the offset)

Jim Blair, Lynnwood, WA '87 Comanche, '83 Jeep J10, '84 Jeep J10
From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)
Subject: Re: [Amc-list] Hot Rod Magazine and Some Thoughts
To: amc-list@xxxxxxxxxxxx
Message-ID: <200802181600.m1IG0gu25053@xxxxxxxxxxxxxxxxx>
 
" From: Jim Blair <carnuck@xxxxxxxxxxx>
" 
" My Spirit is asking for some attention now that the clutch master/slave in my '87 MJ died (I can still barely drive it, but have to pump the pedal several times to get a solid pedal for shifting to first or reverse and it drops QUICK!) Now I need to do an axle bearing on the M15 (anyone know if the '82 Spirit's axles are same size both sides? Thinking about cutting down a D35 shaft to fit and swap out for the 10" brakes as well)
 
d35 spline is the same as amc15 but shafts are larger diameter.  dunno
if bearings are the same.  housing flange pattern is amc20 ['80s] or
mopar ['90s up], not amc15.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx 

_________________________________________________________________
Connect and share in new ways with Windows Live.
http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_012008
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://splatter.wps.com/pipermail/amc-list/attachments/20080218/b945a206/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://splatter.wps.com/cgi-bin/mailman/listinfo/amc-list