Re: [Amc-list] Needed AMC American Front Brake Drums for 9" x 2" Brakest

["StefanGB" <StefanGB@xxxxxxxxxxx>]

Thanks a lot Todd.

I appreciate all the good info!

StefanGB@xxxxxxxxxxx


----- Original Message ----- 
From: "Todd Tomason" <jayscore@xxxxxxxxxxxxx>
To: "AMC/Rambler owners, drivers and fans." <amc-list@xxxxxxxxxxxx>
Sent: Sunday, December 30, 2007 11:52 AM
Subject: Re: [Amc-list] Needed AMC American Front Brake Drums for 9" x 2" 
Brakest


Stefan,

I should have just dug up the whole list.  Here's the AMC venders that I've
used the last few years.

American Parts Depot
Website: http://www.americanpartsdepot.com/
Phone: (937) 678-7249

American Performance
Website: http://www.oldcarparts.com/
Phone: (321) 632-8299

Kennedy American
Website: http://kennedyamerican.com/
Phone: (614) 879-7283

Later,

Todd

On Sunday 30 December 2007 11:14, StefanGB wrote:
> Hi Todd,
>
> Thank you for the website address. I will try them!
>
> I am new at chasin AMC parts, though I work with Ford parts all the time.
>
> Are the AMC parts of the 60's more like Ford, Chrysler or GM? More
> specifically the parts I need are the brake drums and some
> steering/suspension components.
>
> All the Best,
>              Stefan
>
> StefanGB@xxxxxxxxxxx
>
> ----- Original Message -----
> From: "Todd Tomason" <jayscore@xxxxxxxxxxxxx>
> To: "AMC/Rambler owners, drivers and fans." <amc-list@xxxxxxxxxxxx>
> Sent: Sunday, December 30, 2007 6:17 AM
> Subject: Re: [Amc-list] Needed AMC American Front Brake Drums for 9" x 2"
> Brakest
>
> > Have you tried any of the AMC vendors?  I just checked American Parts
> > Depot
> > (www.americanpartsdepot.com) and Doug lists several different drums for
> > 1963.
> > You may have to call him to figure out which one is correct for your 
> > car.
> >
> > Todd
> >
> > On Sunday 30 December 2007 02:02, StefanGB wrote:
> >> I have tried all the local parts stores including Kragen, Pep Boys,
> >> AutoZone, Napa fro these front brake drums. I was able to source 
> >> correct
> >> brake shoes, wheel cylinder and brake hardware kits, inner and outer
> >> bearings, but not a matching drum...
> >>
> >> So far the BD2502 is the only approximate match. It fits, but leaves an
> >> 1/8" from the backing plate. I can get these wholesale for $40.
> >>
> >> Does anybody have a better part number that will fit a 1963 AMC
> >> American? Any part number would be appreciated
> >> (Raybestos/Bendix/Wagner/Centric/Autospecialty/etc.) ?
> >>
> >> Does anybody know what other car drums might interchange?
> >>
> >> Does anybody have used ones that are not out of round and have some 
> >> meat
> >> left on them? These are to be discarded on 9.090 inches normally...
> >>
> >> Thanks in advance for any information.
> >>
> >> Stefan /Stefan's T-Birds/www.ThunderCarsAndParts.com/(818)726-2788
> >> StefanGB@xxxxxxxxxxx
> >
> > _______________________________________________
> > Amc-list mailing list
> > Amc-list@xxxxxxxxxxxx
> > http://www.amc-list.com/mailman/listinfo/amc-list
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.516 / Virus Database: 269.17.12/1202 - Release Date:
> > 12/29/2007 1:27 PM
>
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.17.12/1203 - Release Date: 12/30/2007 
11:27 AM


_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list