I've always thought that while that would be an excellent fix. I doubt it will be cost effective? Is there a chance the rods can be bushed then offset bored to lengthen them? I'm guessing that would be pointless too as then you have to float the pins meaning you need new pistons anyway. Let me know if you come up with a source for those +.040" rods, I'm in for a set! -- Mark Price Morgantown, WV 1969 AMC Rambler, 4.0L, EFI, T-5 2004 Grand Cherokee Laredo, 4.7L, Quadratrc II I have a mistress, my wife even knows her intitials, they are W.J.!!! :] " Chronic Pain Hurts" -------------- Original message ---------------------- From: Jim Blair <carnuck@xxxxxxxxxxx> > > > > The problem I am trying to avoid is the > piston coming down too far in the bore and "kanting" (slapping the > piston back and forth while out of the bore) enough that the skirt > shatters. So far that's the only death of strokers that has been noted > (other than poor machining) > > > > Jim Blair, Lynnwood, WA '87 Comanche, '83 Jeep J10, '84 Jeep J10 > > From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker) > Subject: Re: [Amc-list] Con Rods > To: amc-list@xxxxxxxxxxxx > Message-ID: <200712101458.lBAEwb019807@xxxxxxxxxxxxxxxxx> > > " From: Tom Jennings <tomj@xxxxxxx> > " > " -- Jim Blair <carnuck@xxxxxxxxxxx> wrote: > " > not correctly. I'm chatting with someone about building some custom rods > " > with the extra 0.040 length for stroker rods to make the stock 4.0L > " > pistons come to the top. > " > " I've not RTFM, but couldn't you take .020 off the block and head? > > .020 off the head will boost cr. it won't do anything for 'squish'. > .040 off the block is a lot. it -may- be possible... > ________________________________________________________________________ > Andrew Hay the genius nature > internet rambler is to see what all have seen > adh@xxxxxxxxxxxxxxxxx and think what none thought > > > > > _________________________________________________________________ > Put your friends on the big screen with Windows Vista® + Windows Live?. > http://www.microsoft.com/windows/shop/specialoffers.mspx?ocid=TXT_TAGLM_CPC_Medi > aCtr_bigscreen_102007 > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://www.amc-list.com/pipermail/amc-list/attachments/20071210/b2b3f373/attachm > ent.htm > _______________________________________________ > Amc-list mailing list > Amc-list@xxxxxxxxxxxx > http://www.amc-list.com/mailman/listinfo/amc-list
_______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list