Re: [Amc-list] 68 AMX gauges

[Wrambler242@xxxxxxxxxxx]

Have you checked voltage to the guages now?
Sounds like you are on the right track, but perhaps you are getting 12 volts to the gauges instead of the 5v they require.

--
Mark Price
Morgantown, WV
1969 AMC Rambler, 4.0L, EFI, T-5
" I was different before people dared to be different" 

 -------------- Original message ----------------------
From: Keith Evenson <epd@xxxxxxxxxxxx>
> I am having trouble with the gas and temp gauges in my AMX. When I got 
> the car neither gauge worked so I bought a new temp sending unit and 
> that did not fix it. So I got another gauge cluster to see if it was my 
> wiring or what. The new cluster did not work either so as I was looking 
> at them I noticed my original cluster did not have the "connector or 
> choke assembly" so I put that in mine and it made my gauges move but 
> still not right yet. I switched the voltage regulator with another one 
> now both gauges go to the top way above full and over hot as soon as 
> the engine starts. Does anyone have any ideas what might be causing 
> this? Thanks 
> _______________________________________________
> Amc-list mailing list
> Amc-list@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list

_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list