[Amc-list] Re; Noisy after rebuild

["John Elle" <johnelle@xxxxxxxxx>]

SNIP

What many folks fail to check on a rebuild is "dry lash" of hydraulic

lifters. Yes hyd lifters have a lash spec too!

SNIP

 

Bruce, 

On engine with adjustable rockers I would assume that this spec. 

would become somewhat important, but on an AMC engine with 

non-adjustable rockers or valve lash as it might be referred to it 

is not obvious to me what one would do about this specification 

unless I were to some how verify that the lifters or push rods were

the correct length which would probably be resolved by inspection 

and comparison prior to installation. 

John 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.amc-list.com/pipermail/amc-list/attachments/20070901/ef5f9fba/attachment.htm 
_______________________________________________
Amc-list mailing list
Amc-list@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list