Spro, you didn't miss anything much, just don't understand how the early Jeeps w/AMC engine fitted a TH-400. The AMC TH-400 case didn't come along until around 1972 or 73. It was used through 1969. Prior to that the "universal" model TH-400 (same as the Buick "Nailhead" case/bell -- it was also sold as the universal to other makers because the shallow bell left plenty of room for an adapter -- the old Buick Nailhead had a deep flange on the back of the block) was used with a cast iron adapter ring 1.5"-2" thick. The ring was used mostly with the AMC 327 (65-67 in FSJs), but some Jeep sites report that a similar setup was used with 71-72 AMC V-8s. The 327 has a different bolt pattern than later AMC V-8s, of course. -- Frank Swygert Publisher, "American Motors Cars" Magazine (AMC) For all AMC enthusiasts http://farna.home.att.net/AMC.html (free download available!) _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list