looks like you're starting with a nice car ! crimp'd seams are usually rotted away on these - if you want to remove the tar paper easily - use 'Dry Ice' - let it freeze the paper - comes off easily - USE GLOVES - ! ;) If the rest of the car is this nice - I'd consider just washing the car out with that Rust Remover - and using the existing Paint as a base coat - since it is electrostaticlly bonded rather than just shot on. I've seen cars taken down to bare metal that later rust like fools - so consider the corroless should you go the bare metal route. Once you rinse out the car for rust - make up some 'wands' - plastic tube with a spray nozzle on one end that you can insert into all the rocker panels & channels. =Bt= milnersXcoupe "The Heretic" _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list