My high beam switch (83 SX/4)appeared to be inop as I used it and then it would not turn the high beams off. I thought the switch was broken as I could not feel or hear the usual click when pulling on the turn signal lever. Started messing with it and it started clicking again so I thought everything was good...until I checked the headlights. Now I have no high beams and, possibly no low beams. The low beams(or high beam in the low beam light) are all I have. All of the other lights controlled by the headlight switch (park, rear, side and interior) work normally. I unplugged the high beam switch and then I didn't have any headlights. Any recommendations or troubleshooting tips to try and determine what the exact problem is? ____________________________________________________________________________________ Yahoo! Music Unlimited Access over 1 million songs. http://music.yahoo.com/unlimited _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list