Re: [AMC-List] FWD: wanted: man flywheel for 1967 J3000 232 six
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [AMC-List] FWD: wanted: man flywheel for 1967 J3000 232 six
- From: adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)
- Date: Tue, 12 Dec 2006 13:18:28 -0500 (EST)
" From: "Jamie Smith" <oconner51@xxxxxxxxxxx>
"
"
"
"
" >From: "Jim Blair" <carnuck@xxxxxxxxxxx<mailto:carnuck@xxxxxxxxxxx>>
"
" >I need a manual flywheel for a 1967 J3000 232 six cylinder. It is
" >smaller than the newer 232s & 258s, it took a 10 inch clutch & I am
" >having a hard time finding one. So all I can say is HELP!!!!!
"
"
" I have one off a 1968 J3000 with 232 if that will work. Not sure of
" condition but I can pull it in the next few days (clutch and flywheel
" are still bolted to engine) and check if you are interested. Someone
" please let me know if it is the same. (I am just guessing that it is).
it should be the same; afaik all '65-'71 jeeps are just like all
'64-'71 amcs. there are no engine differences i know of, save the
very short water pump amc only used on the '65 american.
i repeat, -any- '64-'71 amc/jeep manual trans 199/232/258 should have
tina's flywheel on it. there's only one flywheel for these years.
________________________________________________________________________
Andrew Hay the genius nature
internet rambler is to see what all have seen
adh@xxxxxxxxxxxxxxxxx and think what none thought
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list
or go to http://www.amc-list.com
Back to the Home of the AMC Gremlin