Re: [AMC-List] FWD: wanted: man flywheel for 1967 J3000 232 six

["Swygert, Francis G MSgt 436 CES/CECM" <Francis.Swygert3@xxxxxxxxxxxx>]

" From: "Jim Blair" <carnuck@xxxxxxxxxxx>
"
" wanted: man flywheel for 1967 J3000 232 six
"    Posted by: "my67j3000" tina60f44@xxxxxxxxxxx my67j3000
"    Date: Fri Dec 8, 2006 7:10 am ((PST))
"
" I need a manual flywheel for a 1967 J3000 232 six cylinder. It is
" smaller than the newer 232s & 258s, it took a 10 inch clutch & I am
" having a hard time finding one. So all I can say is HELP!!!!!

as the engine came from amc, you'll find it in their cars as well as
jeeps.  they changed the flywheel size in '72; what you need is the
'64-'71 199/232/258 one.

iirc it has two patterns, for 9 1/8" and 10.5" clutches.
--------------------

I believe a 196 flywheel fits also. AFAIK there was no change in the
bolt pattern, and my 196 flywheel was drilled for two different clutch
sizes also -- one larger than the one it used. Not sure about sizes
though. 

_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com