16" power valve? That means that its in enrichment mode at anything under 16" vacuum. Should be more like 6". Could that be the problem? Ken Ames Quoting Tom Jennings <tomj@xxxxxxx>: > On Sun, 19 Nov 2006, Nick Lenarz wrote: > > > * Carb (MC2100) dirty: Nope. I have cleaned the carb three times now, > > with another rebuild kit. All tiny holes were cleared with copper wire, > > carb cleaner, and compressed air. All gaskets are new. 16" power valve > > is new and intact. Manual choke operates properly. No excessive leakage > > at throttle shaft, shaft rotates smoothly. All vacuum ports tightly > > capped. Air cleaner on/off during testing makes no difference. > > It sounds like something is missing, broken, binding, etc, > like some dynamic problem with the float or whatever. Sounds > like you know what you are doing and the carb is clean. > > The Motorcraft carbs work fine, you managed to get a bum > one. Damn bad luck! > > _______________________________________________ > AMC-List mailing list > AMC-List@xxxxxxxxxxxx > http://www.amc-list.com/mailman/listinfo/amc-list > > or go to http://www.amc-list.com > _______________________________________________ AMC-List mailing list AMC-List@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list or go to http://www.amc-list.com