Re: [AMC-List] Rear disc brakes (was: pulling an axle)

[Mark Price <markprice242@xxxxxxxxxxxx>]

http://www.stockcarproducts.com/rsusp4.htm

Scroll to the bottom of the page. Only problem I see is they are almost without a doubt designed for 3" tubes.
--
Mark Price
markprice242ATadelphia.net
Morgantown, WV


---- Tom Jennings <tomj@xxxxxxx> wrote: 
> On Wed, 25 Oct 2006, Mark Price wrote:
> 
> > While searching for truckarm info I stumbled on clamp on rear
> > caliper mounts! They wrap arouund the rear axle tube in two
> > pieces and bolt together, then use waht appears to be a 3/8" bolt
> > drilled to actually enter the axle tube to stop rotation. I'd
> > add some weld after finishing the install to be sure, but it
> > sure looks like an easy setup to allow for aligning things before
> > welding! 
> 
> TELL ME MORE!!! 
> _______________________________________________
> AMC-List mailing list
> AMC-List@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list
> 
> or go to http://www.amc-list.com

_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com