Re: [AMC-List] 3 or 4 hole flywheel interchange

["John Elle" <johnelle@xxxxxxxxx>]

SNIP
Just as a clarification, you are saying that the part
numbers are the same for both manual flywheels and it
does not matter which balancer they are paired with as
long as they are both from the same CID (304, in this
case).
 
THanks again and have a great week,
SNIP
 
Jesse
 
As best as I know, the short answer is 
as follows. As long as the flywheel or
flex plate and harmonic balancer (3 or
4 hole) is off of the same displacement
engine as far as I know you can mix and 
match as needed with out worry of 
affecting the balance of your engine.
John
 
 
 
 
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com