On Mon, 14 Aug 2006, Marty Bricker wrote: > compressor cycling on. Checked the system pressures > and low side was high and high side was low , but > there was pressure. > TSM did not have a t/s procedure for the compressor. > Looking for suggestions on how to figure out why the > compressor will not turn on. Assuming there is nothing else wrong, you might need to jumper the low-pressure safety switch to get the compressor to pump the freon into the system. Once you get it close to right you can remove the jumper. I assume you have the right oil charge and all that. _______________________________________________ AMC-List mailing list AMC-List@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list or go to http://www.amc-list.com