Re: [AMC-List] trannie interchange question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [AMC-List] trannie interchange question
- From: Mark Price <markprice242@xxxxxxxxxxxx>
- Date: Sat, 22 Jul 2006 21:19:14 -0700
You are right the AMC T series trans uses the 10 spline by 1 1/8" input.
I was not thinking quite straight when I said 1 1/16"
The T bird trans is different from the AMC.
The closest match in shifter placement is the Chevette T5. The Chevette is shorter in the taihousing however.
--
Mark Price
markprice242ATadelphia.net
Morgantown, WV
---- Sandwich Maker <adh@xxxxxxxxxxxxxxxxx> wrote:
> " From: Mark Price <markprice242@xxxxxxxxxxxx>
> "
> " my thinking is a little fuzzy, but IRRC, the AMC T5 is eactly the same trans for the 4 cyl and six applications! Same in all dimensions and gear ratios! It is only the bell to engine bolt pattern that differs.
>
> that sounds right to me. also used in jeeps [incl. some xj] to '86.
>
> " Keep in mind this trans was spec'd to AMC by AMC before the other manufacturers realized it's potential.
> " Highlights of the AMC trans,
> " unique shifter placement
> " uses Chryco 904 output
> " uses Chryco speedo adapter and gears
> " uses S-10 T5 shifter pattern
> " uses Ford trans to bell pattern
> " uses GM trans input bearing retainer diameter
> " 4-1 first gear ratio
>
> like this?
> 1352-114 85-86 T-Bird 2.3 T 235ft-lbs 4.03 2.37 1.49 1.00 0.81 3.76 6t speedo 7.41 0.59
>
> " .8 overdrive, IIRC?
>
> might be 0.85 or 0.78. trying to recall if 4s and 6s got different
> like at gm.
>
> " rated at 245 ftlbs torque.
> " input shaft is 1 X 1 1/16" 10 spline
>
> wow. i always thought it was gm 1 1/8 x 10 even though i knew it was
> ford -length-.
>
> " .509 pilot tip or is it .590"? GM anywany. Ford is .460"
>
> .590". you must be thinking of toyota because ford is 0.670", except
> 4-cyl sr4/t4/t5 apps which are... 0.590"! they're also [t5s anyway]
> a touch longer, 7.41" vs. 7.18" and have gm retainer dia iirc. afaik
> only v8 and v6 t5s have 'traditional' ford dimensions on the retainer
> and input shaft.
>
> all vy gd info! going into my permanent file.
> ________________________________________________________________________
> Andrew Hay the genius nature
> internet rambler is to see what all have seen
> adh@xxxxxxxxxxxxxxxxx and think what none thought
> _______________________________________________
> AMC-List mailing list
> AMC-List@xxxxxxxxxxxx
> http://www.amc-list.com/mailman/listinfo/amc-list
>
> or go to http://www.amc-list.com
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list
or go to http://www.amc-list.com
Back to the Home of the AMC Gremlin