Re: [AMC-List] Band adjustment, little aluminum Borg Warner auto
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [AMC-List] Band adjustment, little aluminum Borg Warner auto



" From: Tom Jennings <tomj@xxxxxxx>
" 
" 
" 
" 
" Finding the right filter/gasket is a problem; I think my trans is
" a 1965 M12 (it's been a long time), torque tube drive. rockauto
" shows a WIX #58658, but the description in "more info" says
" it's for a 727. Could be wrong "more info" or wrong part. I'll
" keep looking.

the m12 is an -iron- warner of about '70; for '65 iirc the m10 would
be current -- but an aluminum warner would be an m35 [t35] or close
sibling.  partsamerica is similarly confused about fitment - it asks
you which engine you have, then shows you the same 3 filter kits
regardless, and we know the m35 filter doesn't fit the m10/11/12.  and
it also shows the iron warner crossref to early-'60s mopar...  but not
to the fmx - but if you check ford, you find a '68-'77 fmx listing that
fits '67 amc 290s!  and oddly, '67 amc 287s...

the torque tube shouldn't matter, but you should have a rear-pump
tranny and i don't know if the filter's different from a later
front-only version.

you'd better take your old filter and gasket with you to the store.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated