Re: [AMC-List] my 62 classic project
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [AMC-List] my 62 classic project
- From: <francis.swygert@xxxxxxxxxxxxxxxxxx>
- Date: Fri, 16 Jun 2006 04:20:25 -0000
IIRC the AMC 20 from even a big car will fit (67-78 Matador, etc.). It's
actually about 2" wider, but deeper offset tires will work fine. New
model Mustang wheels have a deep offset. Just get longer grade 8 bolts
for the spindles and space them out about another inch. I used large
grade 8 nuts that slipped over the bolts for spacers on the front of
mine, and that was just right (I think they are 1/2" nuts). A Javelin
axle will be about the right width for stock wheels.
I'm writing an article about putting the rack and pinion in for the next
AIM. I really don't recommend it. It's a lot of work and there really
isn't any gain. It's much easier to put a modern style power steering
box in, and you can get a GM quick ratio box for about the same price as
a rack and pinion, without all the work.
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list
or go to http://www.amc-list.com
Back to the Home of the AMC Gremlin