Re: [AMC-List] BW M12 tran question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [AMC-List] BW M12 tran question



" From: farna@xxxxxxx
" 
" 
" The rebuild kits are only slightly different for the Ford FMX and BW
" trans. Gears, clutch plates, and bands are the same. It also has a
" separate bell and main trans body. If the bolt pattern is the same, the
" transmissions could conceivably be exchanged. I know the Ford units
" have a different valve body, but I'm not sure about input and output
" shaft splines. 

years ago i was told by someone - larry daum maybe? - that the fmx
could bolt into place of a bw.  dunno about splines either - but isn't
the m12 output 28 spline?  that sounds fordish...

hmmm...  if the aod -is- based on the fmx, maybe it would bolt up too?
on the input side anyway.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.wps.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com


Home Back to the Home of the AMC Gremlin 


This site contains affiliate links for which we may be compensated