Re: transmission parts

[farna@xxxxxxx]

On March 16, 2006 andrew hay wrote:
> 
> that's the way it is on my '68 bell.  the retainer is a close fit to
> the hole on the bell.
> 
> hmmm.  so this bell has multi-pattern holes, but was finished
> specifically for only one.  toploader retainers are ~4.84" dia...

Andrew, it's not hard to change retainers as I described in a previous post. As long as the retainer holds the bearing in and fits the input shaft anyway. I had a T-96J (the HD version only use by AMC) which has a slightly larger diameter input shaft. The SR-4 retainer may not have worked on a standard T-96. The point is a top loader can be used with a smaller retainer. 

=============================================================
Posted by wixList Archiver -- http://www.amxfiles.com/wixlist