Re: was Re: SR-4/T-5 Yoke?

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: Tom Jennings <tomj@xxxxxxx>
" 
" []
" 
" 
" I just went out and measured my pre-72 and post-71 bells. These
" are six cylinder parts.
" 
" []
" 
" 
" My "late" bell is double-drilled though, it'll take the T14 or the
" T96 transmission, though the center hole is 4.75" on the late bell
" and about 4.25" on the early.

curious - what is the other pattern [since the t14 and t96 share one]?
sr4/t4/t5 or t150?

the center hole should be ~4.64" for the sr4 or ~4.85" for the t150.
it's 4.25" for both t96 and t14.

finally, just to confuse things, the -jeep- t14 has a different bolt
pattern, retainer, and input shaft, copying the t15 and bolting up to
the deep v8 bellhousing.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen

adh@xxxxxxxxxxxxxxxxx                       and think what none thought