Re: strokers site

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: farna@xxxxxxx
" 
" It's a Yahoo group. Strokers@xxxxxxxxxxxxxxxx, I think.

email is strokers@xxxxxxxxxxxxxxx, and you can subscribe by sending
mail to strokers-subscribe.

all yahoo groups are set up like this, with a -subscribe,
-unsubscribe, and -manager address all derived from the main one.

" Send me an e-mail and I'll send a group invite if you wish. You can go
" to the site and read posts, just can't post anything. If you don't mind
" searching through the posts that might be better for you anyway. Also
" check www.jeep4.0performance.4mg.com, the strokers section. Dino Savaa
" has collected most of the info you need on that site, including best
" cam choices for different combos. The main thing to remember is you
" have to keep cylinder pressure down, either by reducing compression or
" choosing a high overlap cam. Otherwise the EFI won't like the new
" bore/stroke comobo even with bigger injectors and an adjustable MAP to
" fine tune it. 

at least one fellow is running a 258 cam - cause that's what he had -
with no issues and tremendous off-idle torque.

" On July 16, 2005 mail@xxxxxxxxxxxx wrote:
" 
" > What is the strokers site again. Putting in strokers
" > as the search word gets a lot of non-AMC sites (you
" > one-handed typers know what I mean) and even adding
" > Jeep and AMC to the search gets me the same
" > results.....Russ
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen

adh@xxxxxxxxxxxxxxxxx                       and think what none thought