Re: Concord Turn Signals THANKS!

["Mark Price" <mprice@xxxxxxxxxx>]

At one time or another over the years I've had dashes out of most AMC models and you can get the screws out without pulling the windshield, but they are a bear to do that way!
Mark Price
mpriceATwestco.net
Morgantown, WV
69 AMC rambler, 4.0L, EFI, 5 speed 
65 Ambassador Conv, 327 AUTO, Basketcase
01 S-10 CREWCRAP 4X4



---------- Original Message ----------------------------------
From: farna@xxxxxxx
Reply-To: mail-From-mprice-westco.net@xxxxxxxxxxxx
Date:  Mon, 11 Jul 2005 09:25:40 -0400

>Richard, on some of the AMC cars the windshield has to come out to get the dash out. There's a row of screws under the gasket. The 73 TSM that there is a row of screws along the top edge below the windshield, but doesn't say if they are under the rubber. If you can't find them I'd assume they are. 
>
>On July 10, 2005 Richard Estermyer wrote:
>> I needed to take the dash down anyway to replace the broken speedo cable.
>> Interesting is that I could not find/figure out removal of dash from above
>> the steering column.  Also could not get to overlay dash from the gauge
>> conglomerate!  So after taking out the radio I was able to grab the speedo
>> cable, just need to get through the firewall and complete the rest.  Don't
>> know how I would install a clock if I ever got one.  Done Javelins dashes
>> right and left.
>
>=============================================================
>Posted by wixList Archiver -- http://www.amxfiles.com/wixlist
>
>
>
>
>
>