Re: 67-69 intake needed

[farna@xxxxxxx]

Nick, check that Performer again! The last one I saw was designed to fit both early and late heads -- center holes were slotted. I know there are some slight angle issues because of the slight deck height increase, but that's never been a problem before. Failing that, even a stock iron 4V intake would be an improvement. 

On July 6, 2005 Nick ALFANO wrote:

> Anyone have a good aftermarket aluminum intake for a
> 67 290?  I didn't realize that Edlebrock does not make
> a Performer for the early engines until I tried to
> order one.  The Air Gap will probably be too much for
> a stock 290.  A friend of mine wants us to add a
> little power to his dads Rogue for his birthday.  I
> thought a Performer and a 500-600 Holly or Edlebrock
> carb would be a nice upgrade from the stock 2 barrel
> but no dice on the intake.  Please e-mail off list is
> you have one you want to get rid of.  I am in Kenosha,
> WI. 53142.  Also, anyone used one of the old Holly
> Dominator intakes on a 290?  If so, how did it work
> out?  From the looks of the runners, I think a stock
> intake would probably be better for a street car as it
> looks to be an intake designed for a Jeep.
> 
> Thanks,
> 
> 
> Nick Alfano


=============================================================
Posted by wixList Archiver -- http://www.amxfiles.com/wixlist