HO Exhaust Manifold in the Eagle -

["Brien Tourville" <hh7x@xxxxxxxxxxx>]

From:           	"mail@xxxxxxxxxxxx" <List@xxxxxxxxxxxx>
To:             	"hh7x@xxxxxxxxxxx" <hh7x@xxxxxxxxxxx>
Subject:        	mail Digest for 4 Jan 2005 in hour 15:00
Date sent:      	Tue, 4 Jan 2005 15:17:15 -0800
Send reply to:  	mail-From-<# print(JADDR); #>@amc-list.com

got the
manifold and downpipe from was 2wd so the downpipe don't fit 
because of
the front driveshart.
 Now  I'm GUESSING the 4wd Cherokee has a C bend in the downpipe for
the front drive shaft like my Eagle. It APPEARS that if this is so, I
could use one of these IF I had it cut so the Eagle flange could be
welded on it for the Cat seeing as this is also used as a very solid
front support for the exhaust system.
 Anyone see any flaws in this plan.


========================


What did they do to the '91 and up Cherokee that
allows them the different Header from the '87-'90 ?

-or- was it just that a 'fluke' allowd the Renix exhaust
manifold to fit the Eagle - and the '91+ HO
Exhaust manifold is no go - unless you ditch the
front driveshaft ?

             Brien.
         NEW YORK
   eagle registry #501
eagle kammback registry


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.298 / Virus Database: 265.6.7 - Release Date: 12/30/2004