Re: Mooing-Spewing- 65Rambler wont' start
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Mooing-Spewing- 65Rambler wont' start
- From: Ken Ames <amesk@xxxxxxxxxxxxxxxxxxxxxx>
- Date: Sun, 28 Nov 2004 15:50:51 -0700
Yes, the 196 distributor runs counter-clockwise.
Ken Ames
uoting Brian Hagen <brian.hagen@xxxxxxxxxxx>:
> Jim,
>
> Actually, no. The correct sequence is 1-5-3-6-2-4 in a counter clockwise
> direction. Check the factory service manual. The diagram clearly shows it.
>
> Thanks for the clues on the carb!
> Brian
>
>
> ----- Original Message -----
> From: "Jim Blair" <carnuck@xxxxxxxxxxx>
> To: "amc" <mail@xxxxxxxxxxxx>
> Sent: Sunday, November 28, 2004 2:11 PM
> Subject: Re: Mooing-Spewing- 65Rambler wont' start
>
>
> > A: In pic #100_2476 I could see the plate that has the metering rod
> > adjustments covered. I could also see in pic #100_2479 that the plug wires
> > are mixed up. They are going in the wrong rotation. If #1 is correct, then
> > the wires should be going clockwise 1-5-3-6-2-4 (take off the cap and spin
> > the motor. Whichever way the rotor turns is the way the firing order goes
> > on
> > ALL engines)
>
>
>
>
>
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
Back to the Home of the AMC Gremlin