THE FORGED RODS ARE DONE!!!!

["Nick P Alfano" <nick.alfano@xxxxxxxxxx>]

Well, as of Wed of this week, the long wait for the forged rods is finally 
over.  There are a few differences in design from what I originally posted 
back in the spring.  They were originally going to be forged I-beam rods 
for pressed pins.  Scat informed us a couple months back that H-beam cores 
had been made not I-beam.  Ok, better yet but a little more than needed 
for the 360 and under engines.  Now they were going to be H-beam with 
polished beams and 7/16 ARP bolts still for pressed pins.  We wanted 10 of 
the sets to be machined and bushed for floating pins to save guys who 
wanted them bushed a bunch of money having their machine shop do it.  In 
our last conversation with them to confirm what they were going to do 
before finishing, they said bushing 10 sets may take them longer so they 
were told to forget bushing any of them.  Well, the rep in charge of this 
project went ahead a told his finishing guy to do them anyhow only the guy 
doesn't understand English all that well and he finished all of them for 
floating pins.  So we now have a forged polished H-beam rod with 7/16ths 
ARP rod bolts that are machined and bushed for full floaters.  This means 
a very high quality, high buck rod for the price of an off the shelf 
weaker rod.  You can also get forged 360 pistons already set up for 
floating pins to go along with the rods.  So lets start building some 
turbos, strokers and nitrous motors and see how much abuse the smaller AMC 
V-8 blocks will handle. 

Since yesterday, more than 10 sets have been sold.

Nick Alfano