Re: Scat forged rods for my 343?? And my 343 build specs

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: "Jim Blair" <carnuck@xxxxxxxxxxx>
" 
" A: Hey Nick! I know it's a little premature, but do you think they could do 
" the same rods for 258s? (just a slightly different offset)

nb: same zero offset, wider big end.

" I know a lot of stroker builders would like a set!

imho what the stroker crowd would like most is a cast 4.2 crank + 4.0
rod slug.  a copy of the stock 4.0 but with bigger dish and higher
wristpin [but set for 0 +/- deck height] would be very popular.

a good source of 12-weight 3.895" cranks, pre-trimmed for serp belts
and lightened to match the lighter 4.0 rods wouldn't go amiss either.

4.0 + crank + slugs + right-size-larger injectors = basic stroker...
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen

adh@xxxxxxxxxxxxxxxxx                       and think what none thought