Re: POSI / Twin grip complete rear end needed for 71-74 Jav/AMX

[nick.alfano@xxxxxxxxxx]

Joe,

You should have bought the 8 3/4 posi with the 4.10 gears from Pat at the 
Cordova show.  He sold it at a very reasonable price.  There is a 2" 
difference between the 68-70 AMX rear end and a 71-74.  Not sure what the 
overall length is but the backing plate to backing plate measurement is a 
fraction off  52"  on the early style and 54 on the later style.  I have a 
Dana 60 in my 71 that is closer to the size of the earlier AMX and it fits 
nicely.   A set of 28.5 X 10.5 X 15 tires fit with plenty of room to 
spare.  So, it shouldn't matter which one you use unless you are going to 
stick with stock sized wheels and tires.  If that is the case, then the 
early style rear end is going to look funny as the tires will sit in too 
far.

Nick Alfano





Joe <jgray_55@xxxxxxxxx>
10/04/2004 05:22 PM

 
        To:     Nick Alfano <nick.alfano@xxxxxxxxxx>, AMCBOB <chprfn1@xxxxxxxxxxxxxx>, 
AMClist <mail@xxxxxxxxxxxx>, BadAssGremlins 
<baadassgremlins@xxxxxxxxxxxxxxx>, "Gene C. Brown" <genecbrown@xxxxxxxx>, 
"Steven F. Brueggeman" <gonzo@xxxxxxxx>, Greg Cockrell <gregscram@xxxxxxx>
        cc: 
        Subject:        POSI / Twin grip complete rear end needed for 71-74 Jav/AMX


Says it pretty well.I  need a GOOD complete rearend
for a 71-74 AMX / Javelin. Need a 3:54-3:73 ratio.
Would use a Mopar 8 3/4 if someone had a good
one.Missed one i had found. WOULD LIKE to have
dimensions to compare. How much different in length
from 68-70 and 71-74? I'm GUESSING that the 71-74 is
somewhere around 60-61" total(axle flange wheel to
wheel  mounting ) om other side.  NOT including wheel
studs?  THANKS for any help. Joe  Also please respond
direct if possible. THANKYOU


 
_______________________________
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com