On September 17, 2004 Jim B wrote: > A: The trans line on my J4000 developed a pinhole that only leaked under > high torque conditions. It was aimed down at the road so nothing was sprayed > under the truck. > > > From: "John Brooks" <suziz34@xxxxxxxxxxxxxxx> > To: mail@xxxxxxxxxxxx > Subject: trans fluid evaporating > > Heres an AMC wild thought. Jack up the rear end, spread out the cardboard > under the car, and then run through the gears for several minutes, or just > let it run in place. Of course use all the safety steps so WE don't lose it > into the garage or back yard swimming pool. A good cleaning underneath might > help before but shouldn't be needed if it leaks this much. It's not pushing > it out the filler tube when under a hot load and the dip stick is the right > > one. Just checking. or length of tube. I think it might have been a pin hole in the trans cooler line like a few people suggested. We spliced in a compression fitting in after removeing the questionable part of the line. There appears to be no visable leaks but only time will tell. "Doc" ============================================================= Posted by wixList Archiver -- http://www.amxfiles.com/wixlist